Is Alpha Spid still making a ring rotor? Where would one buy one? Thanks Rich - N5ZC _______________________________________________ _______________________________________________ TowerTalk mailing
Thanks for all the replies. I've been in contact with Don, VE6JY. The rings are available. Rich - N5ZC Thanks Rich - N5ZC _______________________________________________ ____________________________
Keith, I purchased a SALA Exofit from https://www.gmesupply.com/dbi-sala-exofit-nex-construction-harness The local Wireless internet guys use this model for climbing their internet towers, including
Bill, I've been real happy with a JK801 rotatable dipole at 138'. I use a Green Heron RT-21dc (the other option is an MFJ-1924 mobile antenna controller) to control the Tornado Tuner. It gives me ful
Ron If its a F12 balun, the long skinny one, it more than likely shorted out internally at the so-239. I have had two go bad. I replaced them with a balun designs 1:1 choke balun. Bob also sells a ni
I replied directly to Pat with some links. Hamplus is sold by DXEngineering. Jeff at GreenHeron Engineering sells the Hamplus 4 stack switch with his wireless card installed. I've gone 100% GreenHer
As I was climbing my 55g tower this morning, I got to thinking. I normally just clip on one, the other or both fall arrest lanyard's to a cross brace. I always have at least one connected to the towe
Tim, Thanks for the link to the videos. The end of part 4 and the beginning of part 5 answered the question. The videos were very well done, I picked up a few more ideas that will make my climbing sa
This is my next step. I'm using the Green Heron Everywhere wireless system for my antenna switching and rotor controls (RT-21's). The RT-21's are off my operating desk and sitting on a shelf at the a
Anyone out in TowerTalk land using a Rotor Genius to control their rotor. I'd like to get your thoughts on how it works. I'm interested in using it on a Tic Ring rotor (so the pot is not needed) and
Anyone out in towertalk land have a stack of F12 antennas on the same mast as described in the subject line. Currently I have a Delta 230/240 stacked about 6' above a C31. I'd like to add a WARC yagi
I'm working on a Log Periodic project. I'm looking for a M2 42' long x 3" diameter boom. If you have one, even if the total length is a bit longer, let me know. Rich - N5ZC __________________________
I have a ring rotor, new in the box for sale. Includes the controller. See the following link for details: https://forums.qrz.com/index.php?threads/ring-rotor-tic-general-1022-brand-new-never-used.78
Does anyone have any experience with a Log Periodic made my DX Engineering that was located in Oregon. If you do I'd like to get your impression of the antenna. Thanks Rich - N5ZC ___________________
I'm in the process of building/re-building a 7&10-30LP8 log periodic. I have most of the parts, however, I'm lacking the linear loading parts/brackets that attach to the rear element. If you have the
I'm getting close to having all the parts to start an M2 7&10-30LP8 Log Periodic build. I'm looking for the machined aluminum linear loading arms that mount on the 3/4" and 1/2" portions of the rear
I'm in the process of building/re-building a 7&10-30LP8 log periodic. I have most of the parts, however, I'm lacking the linear loading parts/brackets that attach to the rear element. If you have the
https://www.arraysolutions.com/antennas-switching/dual-feedline-option-so Rich - N5ZC Does anyone know of a commercial stack-matching box (for 2 antennas) that will send the unselected antenna to ano
Good find John, I've been studying K8CU's log periodic project. I'm toying around with the idea of experimenting/building a Log to go on my 78' tower. I've always wanted to try one. I have a pair of