I'm using the DX Engineering Crimp Tool Kit and matching Amphenol crimp center conductor connectors with excellent results. I will never go back to hauling out the soldering iron again. 73, Bob - W3Y
No questions about the post below, but FWIW, I've used 2" OD, 1/4"wall, aluminum masts for the last 45 years on my 100ft and 120ft towers with no problems. Easy to cut and drill, compared to steel. S
I've used the Yaesu G-1000DXA and G-2800DXA on 100ft and 120ft towers for 20 years and have never had their mounting brackets fail. I also now use the Green Heron controllers. I would suspect that th
I used DXE RG-213 on a recent antenna repair and it has been working great. Glad to hear of K3LR's experience with installs up to 8 years old. 73, Bob - W3YY --Original Message-- From: TowerTalk [mai
I've had excellent coverage from my insurance company for lightning and tower damage over the years. No raise in rates. I have only a small to moderate deductible. I am extremely pleased with the ins
I can't believe all this discussion about cutting 1/4" cable. Just buy a cable cutter - small, cheap, and simple. I have one and it cuts cleanly in one second. Probably could do 1/2". 73, Bob - W3YY