Never thought I'd see it here in perpetually cloudy NW PA, but the neighbor across the street is getting some sort of roof mounted solar array installed.....I tried striking up a friendly conversatio
Thanks Randy....it IS SolarEdge.....6.3 kw unit..... Sent from my iPad _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo
Thanks again Randy.....there are 21 optimizers (each panel must require one, as there are 21 panels)...I photocopied your article to give to the installer, he said hed check with his engineer....he d
Thanks Dave....attempting to setup a RSP1A for the screenshots as you described.....1920 seconds, every 32 minutes? Is that enough to capture? Did you try any other time frames? See my article in the
Are Fronius and SMA brand names or design styles? Sent from my iPad _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo/rf
The house directly across from me had a 21 panel Solar Edge array mounted on his roof. Judging from the activity there, the roof work is all wired and complete. I spoke with the installer during inst
all this is really good stuff considering my neighbors new roof mounted Solar Edge HDWAVE system is live now....getting the 200 kc interference from the optimizers, working with Paul at the ARRL for
Im a newbie at this, but as I understand its the optimizers aka conditioners that are some of the problem, the other is the inverter....every panel has an optimizer, in my neighbors case, thats 21...
The ARRL has been very helpful with my Solar edge complaint....engineer from solar edge contacted me direct, parts have been ordered, patiently waiting their installation.... Sent from my iPad ______
Its not just the west coast.... I never thought Id see it here in NW PA but now I have one directly across the street from me.....solar edge says theyll be out as soon as they get the parts, not hold
get a small Astron linear supply, preferably old stock, if newer, make sure the green wire inside is connected to the chassis by scraping the paint of so it make contact to bare metal, and while you
I've had good luck contacting Paul W1VLF at the ARRL, I think he is the new (relatively) RFI guy. Paul started the case with Solar Edge, and I was later contacted by TJ, a senior field engineer with
My neighbors also sends what he doesnt use to,the local coop grid....but here in perpetually cloudy NW PA, just south of Lake Erie, it cant be much.... Sent from my iPad _____________________________
Make sure its not in your house first....kill the power at the main breaker, and make sure you dont have any battery powered devices still plugged in, like maybe a CATV modem with battery backup for
Lawyers are only good for other lawyers..... Sent from my iPad _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo/rfi
What is the transmit antenna(s) ? Need to make sure its not noise reradiated by a vertical or inverted L Sent from my iPad _______________________________________________ RFI mailing list RFI@contest
Be careful what we wish for.....at least with the 200 kc spacing, we know what we get....although yesterday, while trying out so swl software, that every 200 was way up above 20 MHz, though it was a
What type of internet service do you have, DSL? Does your modem have battery backup? I chased my tail with my cable modem, it has battery backup since I also have voip from them as well....switching
There was a good conversation about this a year or so ago on this reflector. As I recall, the system generated interference with the panels disconnected. Seems like certain panel manufacturers were s
My neighbor across the street had a 21 panel Solar Edge array installed in May 2019, 6.5 kw I believe. I had the 18kc noise spikes, and the 200kc spaced optimizer noise. After working with Paul at th