Search String: Display: Description: Sort:

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[RFI\]\s+Common\s+Mode\s+Line\s+Filter\s*$/: 8 ]

Total 8 documents matching your query.

1. [RFI] Common Mode Line Filter (score: 1)
Author: "qrv@kd4e.com" <qrv@kd4e.com>
Date: Sun, 10 Aug 2014 19:25:07 -0400
Would this be a good general-purpose line filter? http://www.westfloridacomponents.com/C030PD/1A+250Vac+Common+Mode+Line+Filter+EMI+RFI+PMCE-0330.html I take it that 250vac is a max rating & it's fin
/archives//html/RFI/2014-08/msg00005.html (7,164 bytes)

2. Re: [RFI] Common Mode Line Filter (score: 1)
Author: Jim Brown <jim@audiosystemsgroup.com>
Date: Sun, 10 Aug 2014 21:35:43 -0700
No, because what the power industry calls common mode is not common mode. :) The only effective common mode choke is a ferrite choke, following the winding directions for coax of the same approximate
/archives//html/RFI/2014-08/msg00007.html (7,308 bytes)

3. Re: [RFI] Common Mode Line Filter (score: 1)
Author: David Cole <dave@nk7z.net>
Date: Sun, 10 Aug 2014 22:03:00 -0700
Which forces me to ask... What does the power company call common mode? -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.
/archives//html/RFI/2014-08/msg00008.html (8,551 bytes)

4. Re: [RFI] Common Mode Line Filter (score: 1)
Author: Jim Brown <jim@audiosystemsgroup.com>
Date: Sun, 10 Aug 2014 22:15:28 -0700
The voltage between neutral and green. Thanks to a "Pin One-Like Problem" in most equipment, common mode often trash leaves equipment on the green wire, which radiates it. The Green wire SHOULD be bo
/archives//html/RFI/2014-08/msg00009.html (8,349 bytes)

5. Re: [RFI] Common Mode Line Filter (score: 1)
Author: David Cole <dave@nk7z.net>
Date: Mon, 11 Aug 2014 06:39:11 -0700
Hi Jim, Thanks for the expansion on that... I know less than I want to know about Power Line... Any way you know of, that a power company will go along with, to clean up power as it arrives? Ferrite'
/archives//html/RFI/2014-08/msg00012.html (9,273 bytes)

6. Re: [RFI] Common Mode Line Filter (score: 1)
Author: Pete Smith N4ZR <n4zr@contesting.com>
Date: Mon, 11 Aug 2014 11:59:20 -0400
I have an inexpensive Qualtek computer input line filter that is rated 250 VAC at 3 amps.According to the schematic on the side, the third wire is grounded to the chassis on both sides of the filter.
/archives//html/RFI/2014-08/msg00015.html (8,593 bytes)

7. Re: [RFI] Common Mode Line Filter (score: 1)
Author: Jim Brown <jim@audiosystemsgroup.com>
Date: Mon, 11 Aug 2014 10:06:04 -0700
On 8/11/2014 8:59 AM, Pete Smith N4ZR wrote: I have an inexpensive Qualtek computer input line filter that is rated 250 VAC at 3 amps.According to the schematic on the side, the third wire is grounde
/archives//html/RFI/2014-08/msg00018.html (9,418 bytes)

8. [RFI] Common Mode Line Filter (score: 1)
Author: Rob Atkinson <ranchorobbo@gmail.com>
Date: Mon, 11 Aug 2014 14:56:35 -0500
There are other perhaps better and cheaper ways depending on the application. I resort to ferrite only when all else fails. Audio and power line Isolation transformers and bypass caps are good. You
/archives//html/RFI/2014-08/msg00025.html (6,862 bytes)


This search system is powered by Namazu