The Seven Plus is listed for sale on the ten tec site and with auto tuner and filters comes in at around 3200. According to the counter, there are 13 available. I wish him well but think at that pric
I've never heard of any plans for a pan adapter for the Eagle. They have a mod to bring the IF out to the back panel, and that's it. It is on my list of things to try, even though I'm not a big TV wa
The thing that gets me is that it works, and tuned up initially - but now I cannot get it adjusted to make a proper measurement. I wonder what might have changed from the first time I used it and th
Gerry, he said it was a MFJ-974, which I also own, and am very familiar with. --Original Message-- From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com] On Behalf Of Dr. Gerald N
Walt, Exactly right! Of course, if those 120 radials extended several wavelengths from the antenna, well into into the Fresnel Zone, they might begin to have some effect on the elevation angle. But b
seen any listing of the symptoms (specific problems) that common problem? My VI/3 logic board seemed to have "failed" about two years ago. The radio was pretty much completely dead as far as control
OK, thanks, We must light ALC LED and what about MIC GAIN ? If I want reduce OUTPUT RF POWER, do I must reduce MIC GAIN ? 73's herve F8EHJ Le 2 févr. 08 à 18:41, Bob McGraw - K4TAX a écrit : Agreed.
Kim (N5OP) said "I found that the increments of threshold adjustment get very coarse as the threshold is increased." -- Kim, The jumps in the "threshold setting" are not as "course" as you might thin
David, Go to, <http://lists.contesting.com/mailman/listinfo/tentec and you can unsubscribe there. 73..de John/K4WJ At 05:10 PM 2/22/2008, you wrote: Guess I'm blind. I get at least 25 or 30 posts per
If the address they want money sent to differs from their address in QRZ etc. I will do some checking before sending money, and if it is a large quantity of money I almost always check, the safest wa
W9AC wrote: Exactly Barry, There's such limited use of Hi-Fi SSB at the moment... Using that logic, well there's such limited use of broadband over powerlines (BPL) at the moment... Riley Hollingswor
I have always had pretty good luck using WD-40 to remove tape adhesive from painted surfaces, never used it on vinyl. Might want to start on a small area if you try it. I don't know if there's a sour
I know Warren, I believe that the 775 is the best receiver of the current asian crop of rigs (that includes the PRO series) Ron ....... NU1U Ron We feel the same way you do about the Icom 775DSP mind
After years of engineering research, the engineers in Sevierville have found that the black coating on RF generating equipment reduces the birdies and other anomalies that have been reported with som
Anybody: Does TT make a 'project box' that matches the TT omni line? I would LOVE to get this kenwood logo off of my pure TenTec desk... ;) <x-sigsep> </x-sigsep> -- Please send any and all replies t
I suspect all it would take for the likes of Argosy, Triton, Delta, Omni [original models], Corsair, and the other non-digital rigs, is the replacement of the heterodyne crystal used for the 40 meter
I have just listed an almost pristine condition Omni V (model 562) on the "defacto standard on-line auction house" and can it be seen here: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1267