Orion 566AT for sale. All filters installed. Works great. No issues. No manual. No power cord. No mic. $900 plus exact costs for professional packing and shipping. Money back (less shipping both ways
Bernie - I'm interested in your Orion 566AT. Please send some pictures especially with the transceiver powered up. Any scraps or abrasions? Thanks...Ken, K9PGC On 10/25/2021 4:45 PM, Bernie Skoch
There's a software procedure in my Omni V.9 firmware that allows you to exactly calibrate it. Here's a clip form the Omni V.9 manual that tells how to do it. Crystal Calibration Mode - There is now a
Yeah, like that! I was arguing for keeping it because the side-tone is real time and it just blended in over the Rx audio a tiny bit. But, folks who have been accustomed to quasi-QSK got their way an
On Wed,12/9/2015 3:12 AM, Barry N1EU wrote: The bottom line, as far as I can tell, is that Flex engineering made a clear decision, at this point anyway, of providing only ULTRA steep (i.e., vertical)
Number 1 is fixed. As pointed out/suggested loose crystals. I should have know this from my Omni-A/D/C experience. Now on to #2: On transmit I see no power, and no current draw. Whats the best way to
I had a 505 first; the 509 came later. Kept the 509 for 20 years and used it in at least a dozen countries. 73 - Rick, DJ0IP (Nr. Frankfurt am Main) How about the 509 with the 405 and a 3element beam
Ham radio is a respite from the woes of the world, at least it is for me. When I walk into my ham shack, I want to like the stuff that's there and not have it remind me of geopolitical problems. A Ch
Here's a message posted by Tentec Engineering as it relates to the Omni VII, the Eagle and the Argonaut VI. I didn't see that it was posted here so I took the liberty to do so. 73 Bob, K4TAX Just to
I'm listing the following for Roger, W0PEG. If you're interested or have any questions please email Roger at braytonrj@hotmail.com or call 432-230-1576. Please DO NOT reply to this email as he is not
This is a Ten-Tec Titan III Model 417A legal limit amplifier that I purchased new from Ten-Tec. It has always been in a smoke-free environment and is in excellent physical and electronic condition. T
A club that I attended their FD at for a number of years had a 40 meter bi-directional wire beam they used. You might be able to do similar, but in your case being it to be mostly one-directional due
Ah, Yes, will the Orion III have a separate 32bit DSP receiver for the sweep, Wahoo how important is that ? Will it have a second receiver of the same quality as the main receiver ? Wahoo, how import
Did you get my e-mail from last night? I want to buy your 244. Danny N5NBK 940-727-1150 --Original Message-- From: Andrew Moore Sender: tentec-bounces@contesting.com To: Discussion of Ten-Tec Equipme
If anyone is doing Fall shack cleaning and comes across a spare Scout noise blanker (or equivalent, if there is such a thing) or a Scout mobile bracket, I would be very interested in acquiring them
Let me know if you end up with two (2) units. Al Sirois P.O. Box 2 E. Boothbay, ME 04544 207-633-5363 N1mhc@arrl.net == If anyone is doing Fall shack cleaning and comes across a spare Scout noise bla
Hi Jeff, I see your Orion II is sold, but was curious what you liked about it and didn't like about it. And what you are using now. Jeff, W4DD, Atlanta Ten-Tec 566 ORION II with all optional factory