I don't have one myself, but there was recently a discussion on the antenna reflector. The Ten Tec unit has a neat graphical interface, but it only shows the magnitude of the impedance, not the compl
I built an interface for my Icom and Orion II and use the CM500 for both radio's, I love it and it seems to work just fine. I receive good audio reports. New topic - I've pretty much decided to try t
Mike, The CM 500 was a topic at a recent club meeting and it received high marks. I don't think you'll have any issues with it. Several people commented with the success of using it with the K3 and
Mike, I use a Yamaha CM500 with both of my Orion IIs. It works very well, but will require some padding or you'll need to turn the Orion's mic gain way down since its output is much higher than most
Thanks. This is the actual user experience I was looking for. I have one and use it several rigs, just never got around to hooking it up to the Omni. Mike Alexander amsctalx@comcast.net I built an in
On 12/6/2011 10:34 AM, Nathan moreschi wrote: The CM 500 was a topic at a recent club meeting and it received high marks. I don't think you'll have any issues with it. Several people commented with t
No issue at all when using the Omni VII with the Alpha 86/89/87A. We were referring to the Omni VI/VI+. Paul, W9AC Golly, I had no idea there was any issue at all hooking my Omni VII to an Alpha amp,
We all have " accents" that is for sure, but Tennessee is not what I as a New Englander (SW CT type, not VT, not W. Mass, not Boston, nor Maine nor swamp Yankee, etc.) would call a "Southern" accent.
SWEETWATER ALSO HAS A 10 DB PAD WITH XIL CONNECTIONS TO PUT IN LINE WITH XIL 19.95 NO SHIPPING CHARGE CONTACT 1-800-222-4700 EX-1295 TALK TO CORY. Works fine. Use a 10 dB attenuator like this to keep
Barry, Ahhhh. I suspected that they had to be upright Thanks for the confirmation. John / WA1JG Yes any two, as long as you observe correct polarity. Barry N1EU ______________________________________