hallo! I wrote few times about my problems with the Orion I V2. Now I have sent my second email to TenTec, to find a solution. Here are the two emails. Perhaps somebody have the same problems . Bernh
What is the RF gain set at for the sub-receiver? Carl Moreschi N4PY 121 Little Bell Drive Bell Mountain Hays, NC 28635 -- Original Message -- From: "Bernhard Hoidn" <bernhard.hoidn@online.de> To: "Te
hallo sorry I don´t understand exactly what you mean? 73 Bernhard -- Original Message -- From: "Carl Moreschi" <n4py@arrl.net> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com> Cc:
RFGain Main RX 96 and Sub RX 100 What is the RF gain set at for the sub-receiver? Carl Moreschi N4PY 121 Little Bell Drive Bell Mountain Hays, NC 28635 -- Original Message -- From: "Bernhard Hoidn" <
I only suggested checking the RF gain setting on the Sub-receiver because an RF gain setting of 0 would cause the sub-receiver S meter reaidng to go to maximum. It sounds like that is not the problem
you right its not the problem thank you I only suggested checking the RF gain setting on the Sub-receiver because an RF gain setting of 0 would cause the sub-receiver S meter reaidng to go to maximum