Good morning! Has anyone modeled the 1/4 slopers? Perhaps the Alpha Delta DXA? 73 -- Juan A. Granados /K4LCD - WF2XXQ https://sites.google.com/site/k4lcdars/ https://sites.google.com/site/thesdrinsti
Has anyone modeled the 1/4 slopers? Perhaps the Alpha Delta DXA? The pattern and performance of a 1/4 wave sloper is extremely dependent on the tower and what is on the tower, the guy lines (if unins
IMHO a wire 1/4 wave length long wire should preferably be electrically connected to the tower and fed from the bottom of the slope against a good ground system. AM stations that have done this in em
Herb, That depends on the height of the tower. I have two sloping wires on opposite sides of my 110 ft tower (with SteppIR and 2M long Yagi on top) that are INSULATED from the tower and each fed from
Jim.....You hit on a good point with a 1/4 sloper that it should be some distance, in your case 5 feet, from the tower at the top or high voltage end. Having the top right at the tower seems to deter
Jim.....You hit on a good point with a 1/4 sloper that it should be some distance, in your case 5 feet, from the tower at the top or high voltage end. Having the top right at the tower seems to deter