Have an FL2000 and it is not preforming..
It has burnt the resistors in the parasitic chokes and will not stop
oscellating, no matter what I do.
I changed the 572 B's ... Svetlana new ones.Any suggestions appreciated. I
even lowered the plate voltage and still oscillates andburns the resistors.
I am getting tired changing them !
I even tried grounding the grids better with caps and also the input
circuit right at the filaments..... I'm lost.!!
Please help via direct email...
Thanks
Graham
ve1fc@nbnet.nb.ca
http://www.surfcity.nb.ca/~ve1fc/index.html
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|