Amps
[Top] [All Lists]

[AMPS] Suppressor impedance

To: <amps@contesting.com>
Subject: [AMPS] Suppressor impedance
From: measures@vc.net (Rich Measures)
Date: Tue, 20 May 97 22:46:29 -0700
>Rich Measures wrote:
>>I repeatedly asked the naysayers in the Rauchian camp to design a 
>>suppressor (with a 0-ohm ESR Ls) that would replace the c. 5-ohm ESR 
>>Ni-Cr-Fe AG6K suppressor that Wes measured.  
>
>I am not in anybody's "camp". I listen to other people's evidence -
>including Rich's - but I do my own independent thinking. 
>
>>Ian White announced that he 
>>could do so.  He did not. 
>
>Because it was a trivial exercise, not worth doing. Wes Stewart's
>measurements showed that the Rp values of the AG6K suppressors and the
>conventional ones were already almost the same at VHF. 
...snip...

101 ohms of Rp is almost the same as 166 ohms of Rp, Ian?   (@100MHz) 

Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>