Amps
[Top] [All Lists]

[AMPS] Re: [fuses]

To: <amps@contesting.com>
Subject: [AMPS] Re: [fuses]
From: gdaught6@leland.Stanford.EDU (George T. Daughters)
Date: Fri, 23 May 1997 08:36:45 +0008
hi rich et al.,

> If these fuses are rated at 5kV, they will act like fuses.  however, if 
> they are rated at 250 volts, they will not act like fuses.  

what will they act like?  i remember doing some research (back in the 
early 60's)  into the use of the common cylindrical glass fuse as 
protection for expensive (then) semiconductor circuits.  as i recall, 
our results could be summarized like this:

"semiconductor devices are very effective overload protection for 
fuses"

which is *not* what we were hoping for!

73,
 
George T. Daughters, K6GT

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>