Amps
[Top] [All Lists]

[AMPS] dummy loads

To: <amps@contesting.com>
Subject: [AMPS] dummy loads
From: gdaught6@leland.Stanford.EDU (George T. Daughters)
Date: Sun, 15 Jun 1997 01:24:22 +0800
hi ampsters,

i am designing and building a 1.5kw linear amplifier, and i'm to the 
stage where i've roasted an MFJ264 air-cooled 1.5kw dummy load.  it 
is now a 150 ohm unit.  i know they only dissipate 1.5 kw for 10 
seconds, but i guess i exceeded that.

i've e-mailed mfj to see if they will supply replacement resistors, 
but in the meantime, i bought an MFJ250 which seems to be like the 
old heath "cantenna".  it is oil filled, and i'm using the xfmr oil 
they supplied.  it is rated at 1kw for 10 minutes, but they 
don't say anything about 1.5kw at all (although they say 2kw pep).
has anyone had experience with the mfj250 and 1.5kw?  am i going to 
prepare "french fried resistor" instead of the roasted one i already 
have?  the french-fried ones are surely more fattening!

responses direct please, to 

gdaught6@leland.stanford.edu

mni tnx es 73, k6gt


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>