Amps
[Top] [All Lists]

[AMPS] Kenwood TL-922A/10 meters

To: <amps@contesting.com>
Subject: [AMPS] Kenwood TL-922A/10 meters
From: measures@vc.net (Rich Measures)
Date: Mon, 25 Aug 97 10:50:12 -0800
>I've seen a couple of these amps advertised that include 10 meter
>coverage. Was this a factory installed option? 

not for US owners.

>I haven't really opened
>mine up to see if the circuitry is there. Anyone know? stan

The circuitry for the 10m tuned input is taken from the Citizen's Band 
filter.  A setscrew is removed on the bandswitch assembly to enable the 
10m position.  Increasing the Q (more C/less L) of the 10m tuned input  
is typically needed to secure a good SWR. 
- If a tuner is used between the exiciter and the 922, 12m operation 
works ok on the 10m position.  
Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Kenwood TL-922A/10 meters, Rich Measures <=