On Tue, 9 Sep 1997 07:18:04 +0100 "Ian White, G3SEK"
<G3SEK@ifwtech.demon.co.uk> writes:
>Rich Measures wrote:
>>The comparison involved similar, complete Ls/Rs VHF suppressor
>>assemblies. One was a W8JI/C.T. Rauch, Jr. design the other
>suppressor
>>was essentially identical except that resistance-wire was used for Ls
>
>>instead of copper-wire. N7WS' Rp measurements are published at:
>>http://www.vcnet.com/measures/Rp_comp.html
>
>To be fair, N7WS' own rather different interpretation is published at
>http://www.azstarnet.com/~n7ws
Don't forget to go to the "Humor" link also.....makes interesting
reading!
I also note that the AL-80B resistor measured 109 Ohms after the test, no
mention is made of the value before the test.
Also noted in the Graph page was a suggestion to parallel an additional
250 Ohm resistor across the network. I believe that this identical
procedure was published by Bill Orr, W6SAI some 20-30 years ago. I'll
have to rumage thru the files and see if I made a copy...I usually saved
everything Orr wrote.
Excuse...time to go and take my stupid pills so I can continue arguing
with Tom.
73....Carl KM1H
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|