Amps
[Top] [All Lists]

[AMPS] electrolytics

To: <amps@contesting.com>
Subject: [AMPS] electrolytics
From: Peter.Chadwick@gpsemi.com (Peter Chadwick)
Date: Mon, 13 Oct 1997 09:33:43 +0100
Steve KO0U says:-

>And if you use electrolytics in your PS, orient them in such a manner
that >when you need to peer inside the chassis, the bakelite bottom with
its >bleeder hole does not peer back at YOU. 

Amen to that. I knew a guy at Marconi's who lost an eye when an
electrolytic went up in his face. But even keeping the blow hole
pointing away doesn't always prevent accidents - there was lab in a
wooden hut at Marconi's with an electrolytic can embedded in a 2 by 4
roof truss, where it exploded upwards and the can came out of the clamp.

73 Peter G3RZP

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] electrolytics, Peter Chadwick <=