>Good morning,
>Here are details of repairs I found necessary when one 3-500Z
>had a grid-filament short in my TL922:
...snip...
>What is the best component to protect the filament/bias transformer
>is the event of an unexpected grid/filament short in the TL922?
Convert the 922 from V-cutoff bias to R-cutoff bias. To do this:
1. Remove the +120v power supply connection to the bias relay contacts.
2. Connect the existing 100k ohm, 0.5w resistor, across the NO contacts.
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|