>Am in the process of building an 811A amp. 4 tube variety. I'm
>up to the tuned input and have some questions. I see in Orr's
>handbook a tuned input circuit using a tunable slug coil and a
>cap for each band. This differs from the usual pi type input
>cicuit. Question: is this a good
- Eimac recommends using a Pi network tuned input. The Q needs to be
roughly 2 (Xc1=25 ohms). . If you have the room, 6 tubes would be a
bit more in line with the drive that current radios deliver. The 811A is
only good for 65w dissipation.
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|