Shawn wrote -
>Ok, Hows the math on this, Isn't the 2500E supposed to have 3 3CX800's
>in parallel? I'm sorry but 3500W output sounds like way past saturation
to
>me....Unless I am mistaken on the tube complement. Any comments?
Funny you should mention that. A while ago QST ran a review of a six meter
amp using a single 3cx800. The claimed output was 1200 watts, which would
agree with the above claim. Problem is the max ratings according to Eimac
are 2250v @ .6a. I think that figures out to something like 900 w out max.
Even the 3CX800 amps that are in the Handbook are rated at 750 w out. This
becomes more of a concern on vhf because the typical rig or transverter has
about 25 w which seems fine at the 750 w amp level. To get the 1200 out you
have to put a brick amp in between the two and very rarely are those things
set for lowest intermod. On hf so many rigs have 100 w out so you don't
need the IPA. Anybody ever notice splatter from one of those things on 6 or
2?
Frank
W2FCA
(That the reason I'm doing tetrodes - what I have will drive it just fine)
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|