>Also, one needs to bypass the primary and secondary windings to the core
>so that there is no RF potential between the windings. The transforner
>can be mounted on a piece of 0.125" thick epoxy-glass [G10] board. The
>core to gnd capacitance figures in the C2 tuned input values on the
>higher bands. 20uH of L is plenty for 160m-10m coverage. More L is not
>mo-betta.
Thanks Rich! I forgot that part!
73,
Jon
KE9NA
-------------------------------------
Jon Ogden
KE9NA
http://www.qsl.net/ke9na
"A life lived in fear is a life half lived."
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|