>Has anyone tried using putting a single (or pair?) of 3CX800's in a
>MLA2500?
>It would seem all you would need to do electrically is add a 6.3 Volt
>Filament transformer to boost the voltage to 12.6 volts for the new
>tube(s).
>IMHO, a pair would be "right out!" the two 8875's have a COMBINED
>plate dissipation of 800w, just right for a SINGLE 3cx800.
>two of them would be likely to lure the operator into trying for too
>much power, which would let the smoke out of the dentron's tank
>circuit and power transformer.
Over the weekend, a friend put forward his theory that we've got it all
wrong with electrons (and holes):- power devices actually run on smoke.
Proof? When the smoke gets out they stop working :-)
Steve
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|