To: <amps@contesting.com>
>> Date: Fri, 22 May 1998 12:55:38 +0100
>> From: Peter Chadwick <Peter_Chadwick@mitel.com>
>
>> Why is the output low on the higher frequencies? I agree with Carl that it
>> often is a sign, but I fail to understand why.
>
>While emission deterioration is the same across all frequencies,
>it is more noticable on frequencies where the system is on the edge
>of just having enough gain.
>
>73, Tom W8JI
However, for a tube that is rated at full input at 110MHz, 28MHz would
seemingly not be on the edge.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|