To: <amps@contesting.com>
> Date: Sat, 23 May 1998 15:34:02 +0000
> From: Scott Townley <nx7u@primenet.com>
> Anyone have any insight as to what capillary lamp service is?
Not me.
> Any reason
> this wouldn't be suitable for a voltage doubler? The secondary resistance
> is 13.1 ohms; looks promising to me.
The AL-80B transformer is in that voltage range, and has nearly the
same secondary resistance as your transformer. It sounds like you
have about the same thing performance, if the other losses
are also the same.
Expect about 10% or more voltage sag no load to full load if you use
enough capacitance and keep the current down around 400 mA or so.
About 20% or more sag if you try to pull 800-900 mA.
73, Tom W8JI
w8ji.tom@MCIONE.com
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|