[AMPS] Air Sealing of RF chamber

To:	<amps@contesting.com>
Subject:	[AMPS] Air Sealing of RF chamber
From:	G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date:	Sun, 24 May 1998 09:16:18 +0100

John Lyles wrote:
>

>HEY, I don't use big blowers! I use water cooling.

Ooops - sorry! I forgot that "real hams" don't use air cooling.

Seriously, thanks very much for the information, John. In a few years it
will all be available on the web, but right now it's very valuable.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Sealing of RF chamber, Jon Ogden [AMPS] Sealing of RF chamber, Ian White, G3SEK [AMPS] Air Sealing of RF chamber, John Lyles [AMPS] Air Sealing of RF chamber, Ian White, G3SEK <= Message not available [AMPS] Air Sealing of RF chamber, John Lyles [AMPS] Sealing of RF chamber, Steve Thompson

Previous by Date:	[AMPS] parasitics, Tom Rauch
Next by Date:	[AMPS] new transistors for UHF power, Steve Thompson
Previous by Thread:	[AMPS] Air Sealing of RF chamber, John Lyles
Next by Thread:	[AMPS] Air Sealing of RF chamber, John Lyles
Indexes:	[Date] [Thread] [Top] [All Lists]