>
>Hi all,
>This is my first post to this reflector. I hope it makes it ok.
>
>I am planning to rebuild my old amp (4 - 811A's in G-G) and replace the
>entire deck with a single 4PR1000.
>I have the Socket, HV transformer, caps, roller inductor and the rest. I
>still need the Filiment Xfrmr though.
>
>Has anyone built an amp using one of these tubes? If so, how did it fly?
>Any glitches with the tube or other annoyances that are noteworthy?
>
A pesky screen-resonance at c.25MHz. . It thrives on high anode-supply
potential. If you have c.200w of available drive, you can cathode drive
it. Grid driven AB1 needs around 75w of drive.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|