At 11:00 AM 7/22/98 -0600, Richard W. Ehrhorn wrote:
...
>Then FIRST THING after opening the cover, short the HV line to chassis two
>or three times with an HV-shorting stick, or at least with a long,
>well-insulated screwdriver, before touching anything! NEVER TRUST YOUR LIFE
>to switches, relays, cover interlocks, crowbars or the like - even with a
>well- designed commercial amp, the stakes are just too high to take
>chances.
Amen. Many years ago a friend got one hand on a ceramic standoff that was
used as the HV input on a surplus amp - maybe a BC-610 - and the 2KV
knocked him cold, threw him across the room and left a huge divot in his
thumb. I was told while still a pup that, when double-checking that your
caps have discharged, you should always be sure that the blade of the
screwdriver is in contact with ground before you bring it near the +B.
Make sense?
73, Pete Smith N4ZR
In wild, wonderful, fairly rare WEST Virginia
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|