>
>If you have a transceiver with a 3rd transmitter IMD -25db below pep, and
>the amplifiers third order imd is -40db, what is the final 3rd imd figure
>for the combined transceiver and linear?
>
Pretty close to -25db
>Secondly in the case ab2 grounded grid, when the driver contributes to feed
>through power what is the final figure when the driver has a poorer IMD.
the poorer source is still the prime determiner
>Also what happens with AB1 amplifiers?
the same
- later, Craig
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|