Amps
[Top] [All Lists]

[AMPS] SB-220 relay

To: <amps@contesting.com>
Subject: [AMPS] SB-220 relay
From: n4zr@contesting.com (Pete Smith)
Date: Mon, 09 Nov 1998 12:55:31 -0500
 Again during SS, I had problems with the switchover relay in my SB-220
sticking, due to hot switching.  I was using TRLog, which provides for a
PTT signal to the AMP a programmable interval before the first CW character
is sent, but that didn't seem to help.  At least, I set it as high as 75MS
and still had the difficulty.

I have a couple of circuits for a QSK system, including AG6K's and one
specifically designed for the TS-930, but those are a fairly ambitious
winter project, and CQWWCW is only 3 weeks away.  Has anyone had experience
with other means of speeding up the 220's relay, such as current-limited
higher initial voltage (analogous to the way vacuum relays are speeded up
for QSK)?  I have such a circuit, originally designed for the TL-922, but
don't know if this would work with the +/- 100 VDC on the 220's relay. 

Thanks, guys!


73,  Pete Smith N4ZR
Loud is good -- go PVRC!


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] SB-220 relay, Pete Smith <=