500W "Conservative" it says on the data sheet. Those are AM watts.
Strap coil is .4uh and the wire coil of #8 wire is 16.4 uh. I also have
the inductance per turn chart if u need it, plus full data sheet on all
AirDux coils.
The assy will handle 1500W SSB with ease, uses bigger wire than the
AL-1500 !
73 Carl KM1H
On Fri, 4 Dec 1998 08:49:07 +0008 "George T. Daughters"
<gdaught6@leland.Stanford.EDU> writes:
>
>
>hi doug,
>
>> I'm turning my thoughts to the RF
>> deck. I picked up an inductor that looks like it might be OK in the
>> tank, but I have no data on it. It was made by Illumitronic
>> Engineering in Sunnyvale, CA, and says "air dux PI #195-1" on the
>> plexiglass support. Does anyone have any data on this inductor? By
>> itself I think it would cover 80-10, so I'll have to add more
>> inductance to cover 160. I'll make some measurements this weekend.
>
>as i recall, the 195-1 was rated by the mfg. at 500 watts. they also
>
>made a 195-2, with a pretty hefty tubing coil for the high bands
>which was rated at 1kw.
>
>i don't have my data sheet with me here at work,
>it's at home. i can check it and send you a follow-up msg if no one
>else here on the reflector comes up with it.
>
>73,
>also in sunnyvale
>George T. Daughters, K6GT
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|