It is a high mu, forced air cooled,rugged,ceramic/metal power triode
intended for use as a grounded grid,zero bias class AB2 AMPLIFIER.
FILIMENT voltage 6.3volts@25 amps max freq.110mhz,AMPLIFICATION FACTOR
est.200 Interelectrode Capacitance est,CIN-17.6 pf,Count-0.08pf, Cgp-9.7pf.
Plate transformer 3000v@2 amps
Plate current 562mls@4500volts.
KB8JCY stocks this tube fits right in the 3-500 socket.You can really run
this buy only changing the filiment trans 100ohm 7 watt rest.
and putting a blower on the amp .
Howell Sales 330-747-1841 is handeling the mod kits....
Monty Taylor wrote:
> Tell me more about this tube. I am getting ready to replace a pair of
> 3-500z's in an old Raytrack DX2000L.
> Regards,
>
> Monty/WB5GLB
>
> -----Original Message-----
> From: NI4L <ni4l@bellsouth.net>
> To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
> Date: Monday, December 07, 1998 2:41 PM
> Subject: [AMPS] YC240 /YC229
>
> >
> >Sounds like Eimac has comebup with something pretty good to replace the
> >3-500Z with.
> >Anyone tried this conversion yet?
> >
> >
> >--
> >FAQ on WWW: http://www.contesting.com/ampfaq.html
> >Submissions: amps@contesting.com
> >Administrative requests: amps-REQUEST@contesting.com
> >Problems: owner-amps@contesting.com
> >Search: http://www.contesting.com/km9p/search.htm
> >
> >
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|