[AMPS] tuning capacitor & insulator

[Peter_Chadwick@mitel.com (Peter Chadwick)]

        >Eimac must take a lot of the blame for this. Their "typical"
operating
        >data for the 4CX250R claim 470W PEP output - but with 3rd order IMD
at
      >only -23dB, and 5th order at only -27dB. 


For the 250B, RCA claimed about 290 watts PEP from memory: that was without
circuit losses. 
Q problems (too much of it) at VHF/UHF are likely to be significant in
reducing overall efficiency


73

Peter G3RZP

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm