You can go to the CPI Eimac page and download spec sheets....
73, Jim W7RY
-----Original Message-----
From: dan hearn <dhearn@ix.netcom.com>
To: LOMAX1@prodigy.net <LOMAX1@prodigy.net>
Cc: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: Sunday, January 03, 1999 9:06 AM
Subject: Re: [AMPS] Tube dimension question
>
>Data sheet says 3.25 min to 3.42 max inches. That is from top of anode to
>bottom of grid ring. The grid ring is 0.235 wide. 73, Dan, N5AR
>
>frank ayers jr wrote:
>
>> I have misplaced my spec sheet on the 8877. Can anyone tell me the
>> dimension from the grid ring to the top of the tube? In other words, how
>> high would it stick up from the chassis when mounted in the SK22 whatever
>> it is socket.
>>
>> Tnx
>>
>> Frank
>> W2FCA
>>
>> --
>> FAQ on WWW: http://www.contesting.com/ampfaq.html
>> Submissions: amps@contesting.com
>> Administrative requests: amps-REQUEST@contesting.com
>> Problems: owner-amps@contesting.com
>> Search: http://www.contesting.com/km9p/search.htm
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|