Hello all,
FWIW, I use solid core automotive spark plug cable. It fits the Millen HV
connectors just fine. Longevity has got to be better in the house than
under the hood of a car. I would guess it must be good for about 40kv or so.
73 de Steve, NJ4F
At 08:29 AM 1/18/99 -0800, Rich Measures wrote:
>
>>
>>Carl wrote:
>>>>The RG58 cable is rated at 15kV (DC, not RF) but not many amps.
>>>
>>>
>>>You are way off Ian. RG-58C/U is rated at 1900V and RG-59B/U is rated at
>>>2300V per MIL -HDBK-216. Those are the solid dielectric cables, not foam.
>>>
>>Yup, same cable - but are you absolutely certain that 1900/2300V are DC
>>ratings? I'm looking here at a catalog that says 2.3kV peak RF, but also
>>15kV DC. Similar ratios apply for other cables.
>>
>>RG58 is routinely used for nucleonics applications carrying 5-10kV DC.
>>
>? I can not break down RG-58/u with my 30kV-DC high-pot. tester.
>
>
>Rich...
>
>R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|