Go buy some lead underpants!!
John ZS5JF
----------
> From: KA2YKC@aol.com
> To: royanjoy@ncn.net; amps@contesting.com
> Subject: Re: [AMPS] 3-500Z filament voltage
To: <amps@contesting.com>
> Date: 01 February 1999 04:00
>
>
> In a message dated 1/31/99 5:40:25 PM Eastern Standard Time,
royanjoy@ncn.net
> writes:
>
> << Monty...
>
> For gosh' sakes, contact your power company about that outrageously
high
> line voltage! They are supposed to keep it well within specified
limits--not
> nearly that high. They will come out and adjust it for you. (It must
have
> been coffee-shop time when they installed that polepig, and forgot
to return
> after the 1-hour break to adjust the tap). That much voltage can
damage
> other appliances as well as fils. Of course, maybe you like the
boosted QRO
> from the B+ increase?
>
> 73, K6XK >>
>
>
> What is the recommended line voltage ? I also seem to be on the high
side
> here @ approx. 245VAC.
>
> Nuclear generating station only 3 miles away !
>
> 73
> Eric
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|