On Wed, 3 Feb 1999 22:54:23 -0600 Jon Ogden <jono@enteract.com> writes:
>
>>(remember Carl's suggestion from way back of using
>>the ARCO mica compression trimmers)
>
>Where can one get the ARCO compression trimmers?
Carl just got several hundred more in stock. Many popular values and
more are on back order.
I would also suggest toroids for the L and not an archaic slug tuned
coil. I often suspect a lot of ham type problems are caused by coupling
from coil to coil when solenoid type coils are used without consideration
of the coupling issue. Toroids greatly reduce that problem and still
offer some adjustment via turns spacing.
73 Carl KM1H
>
>73,
>
>Jon
>KE9NA
>
>
>-------------------------------------
>Jon Ogden
>KE9NA
>
>http://www.qsl.net/ke9na <--- CHECK IT OUT! It's been
>updated!!!!!
>
>
>"A life lived in fear is a life half lived."
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|