In a message dated 2/5/99 2:39:26 AM Eastern Standard Time, W4EF@pacbell.net
writes:
<<
An interesting test would be to plot the input VSWR of the amp as a
function of drive level. If the departure from linear behavior is as
significant as everyone seems to be claiming, then you would expect
to see a change in VSWR as a function of drive level.
>>
I tune the suckers (input or output circuits) like this:
Lookup in the books (or calculate) ballpark values of tuned circuit
components. Wire them in. Bring them into ballpark with dipper or MFJ. Fire up
the ugly amp and adjust the components for maximum output (or min SWR), first
at lower power, then at full load, full bore. Tweak the L or C, mark it for
future reference, button it up and operate. This includes all the variables
that come to play, even connectors. Just watch the HV!
Yuri K3BU
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|