Hello again,
Per the previous posts requesting a "glue" for ceramic material.
Varian (not Dupont as I previously posted) manufactures an Epoxy Resin
called
Torr Seal. It contains Crystaline Silica and states warnings against
inhalation of the dust.
It dries rock hard, has considerable temp ratings in both heat and cold
extremes. The two people I know with experience using Torr Seal say that
it's RF properties are mostly transparent in the smaller applications
they work with it.(Ft, approx 300MHz)
It's white in color, drilled and tapped when cured.
"The hook"
It's very expensive, the typical larger 'two-tube' epoxy Resin and
Hardner in a small box is just under $40 where we buy it.
You can pick it up direct from Varian by phone at 1800-8-varian
The (part) order number is 953-0001
Torr Seal is just the ticket for repairs, it may not be cost effective
for one time use.
73's
skipp may wv6f
nospam4me@juno.com
http://sonic.ucdavis.edu for Southpark and other fun.
http://pilot.ucdavis.edu for the TRS-80 home page.
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|