>Rich,
>im using it as a bleeder along with 2 others same value limited space
>dentron dtr2000 doing k5wl mod two just get too hot need and only
>have room for one more same value help knock edge off.
>thanks chris ni4l
Higher current bleed on a C-filter hv supply is as useful as teats on a
boar hog. However, in a resonant-choke filter this is not the case. For
a 4000v supply with a C-filter, I would use (8) Matsushita 100k-ohm,
3w-rated mof resistors in series. We have sold over 5k of them
(48-cents) for retrofitting in SB-220s, Alphas, et cetera, and to date,
no reported probs. . .
>
>Rich Measures wrote:
>
>> >
>> >100k 50 watt resistor any body have one ?
>> >thanks chris ni4l
>> >
>> ? Chris: Is this for a resonant-choke filtered supply or a simple
>> C-filtered supply?
>>
>> Rich...
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|