Hello OMs.
Would you please to help me with my FL-7000 amplifier. Yesterday evening the
amplifier didn't tune and it is not possible to operate it.
Here are the details:
1. When I change the band in my FT-1000MP the FL-7000 also changes the band
and the yellow "WAIT" lamp lights. But it lights all the time. FL-7000 does
not tune and the "READY" light does not flash. I waited over 15 minutes and
it doesn't work.
2. When I tried to work without tuner, the "PROTECT" lamp flashed even in
5-10 Watts from transceiver, so it is not good way to operate with the
amplifier without tuner......
3. It seems, that when the "TUNER" button is on there is a little
attenuation of the receive signal. When I pushed off the button incoming
signal was right.
Your help would be fine.
Best 73,
Pawel, SP7NMW
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|