Ron:
Before the zinc chromate primer, etch first. Sherwin Willliams makes an
etch
for aluminum.
Dennis
Bob Dodson WB5APD EM84ak wrote:
> Ron Spencer wrote:
> >
> > Well the resistor subject got so much attention I will ask another question.
> > What is a good paint for the aluminum panels or I should say front panels. I
> > have a collins case about 36 inches tall that is black and I want to paint
> > the aluminum panels with something that will stay on them and lood good.
> >
> > Ron
>
> Prime with zinc chromate primer, then use any kind of enamel paint
> over
> it. That is what is used on aircraft. Can get spray cans of zinc chrmate
> at local airport.
> Bob
> wb5apd
> >
> > --
> > FAQ on WWW: http://www.contesting.com/ampfaq.html
> > Submissions: amps@contesting.com
> > Administrative requests: amps-REQUEST@contesting.com
> > Problems: owner-amps@contesting.com
> > Search: http://www.contesting.com/km9p/search.htm
>
> --
> 73's
> Bob Dodson
> Dahlonega Ga. WB5APD/EM84AK
> "ex-WA4WQC, ex-WV6SKV"
> mailto:wb5apd@stc.net
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|