I don't believe that my earlier post was clear enough. I have a HV
supply
with 1500V before the filter caps etc. Just the secondary voltage of the
transformer. I could use a filter choke to get the desired output but I want
to use filter caps. Also the primary of the Variac would need to be 110V.
Thanks to the group de ki4m..
73's de
Shane KI4M/KV4I EM95AQ Primary 2M operator for KV4I
shane@icu2.net <mailto:shane@icu2.net>
ki4m@arrl.net <mailto:ki4m@arrl.net>
cbrcrazy@geocities.com <mailto:cbrcrazy@geocities.com>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|