Amps
[Top] [All Lists]

[AMPS] Re: CW amplifier tubes

To: <amps@contesting.com>
Subject: [AMPS] Re: CW amplifier tubes
From: jmellis@ihug.co.nz (Martin Ellis)
Date: Sat, 20 Mar 1999 12:41:01 +1300
Vic, K2VCO wrote:
>> One more question: may I get your opinions on cooling
>> 3-500Z's? Is it better to use chimneys and a pressurized
>> chassis, or the 'sb-220 method' with a muffin fan blowing
>> across the tubes?

 Carl KM1H replied:
> The 220 method works well as long as you direct some air
> at the socket pins.  The Harbach fan makes this an
> attractive ( cheap) option to chimneys.  You could also use a 
> muffin fan if you are careful in the selection and positioning.

The amplifier that seems to run cool and quiet is the KW TL922.
This uses a fan on the rear of the cabinet. It does not blow air
across the tubes.  The fan is mounted directly behind the
2x 3-500z tubes, and extracts air from the cabinet.  The cabinet
needs to be several inches from a wall to allow the heated air to disperse. 
After 2 days contesting on SSB, the top on the TL922
cabinet is still at room temperature.
In comparison,
the top cover of a 2KD-5 was hot enough to fry eggs.

Martin ZL1ANJ

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>