>
>Good Evening....
>
>I am in the process of rebuilding a TL922 for a local club. Unfortunately
>one of the members decided to put his hands inside before I became involved.
>
>I am looking for a LOAD air-variable capacitor, two (2) Anode diss. rings,
>two (2) parasitic suppressors (original stlye), and two (2) grid chokes.
>
>The main items I need are the plate diss. hardware and LOAD cap. The
>others I can work around, but the club would prefer original parts where
possible.
>
? Odds are that the original 922 vhf parasite suppressors were removed
for the same reason that the grid RFCs were removed -- i.e., they were
crispy-crittered at the same time by the same thing. My guess is that
replacement with original parts may lead to a replay of the original
problem. There is an article about circuit improvements for the TL-922
on my Web site.
>
- later, Eric
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|