Amps
[Top] [All Lists]

[AMPS] Resoldering 3-500Z Filament Pins ??

To: <amps@contesting.com>
Subject: [AMPS] Resoldering 3-500Z Filament Pins ??
From: km1h@juno.com (km1h@juno.com)
Date: Tue, 6 Apr 1999 15:00:05 -0400
Would you guys please change the subject header?

Tnx  Carl  KM1H



On Tue, 6 Apr 1999 09:59:12 +0100  Peter Chadwick
<Peter_Chadwick@mitel.com> writes:
>
>VK3BKG says:
>
>> I now try to keep the habit of always shorting out the anodes before 
>going
>>>in, regardless of the powered status of the amp, even at the risk 
>of
>>>possibly damaging something if the HV is on. 
>
>Me too! I believe that this a habit that should be encouraged. And I 
>don't
>trust interlocks, either.
>
>73
>
>Peter G3RZP

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>