----- Original Message -----
From: Michael . Symonette <ke4krs@netzero.net>
To: <amps@contesting.com>
Sent: Friday, May 07, 1999 9:51 PM
Subject: SWAN MARK II AMP
> Can anyone help identify a diode in the Swan Mark II Amp Pwr Supply
circuit
> ? There is a diode connected across the 40 MF / 350 volt capacitor at the
> base of the mercury relay. The cathode is connected to the positive side
of
> the 40 mf /350 volt electrolytic and the anode is connected to the brn
wire
> on the power connector at pin 7, which comes from the amp on/off switch.
>
> This diode is not located on the schematic that I can determine. Can
anyone
> help ?????
>
>
> Mike KK4MS
>
________________________________________________________
NetZero - We believe in a FREE Internet. Shouldn't you?
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|