Amps
[Top] [All Lists]

[AMPS] leakage current of electrolytics

To: <amps@contesting.com>
Subject: [AMPS] leakage current of electrolytics
From: zeitler@ibm.net (zeitler@ibm.net)
Date: Sun, 23 May 1999 21:39:27 -0700
What is the acceptable limit for leakage current on electrolytic capacitors?
The units in use are 560uF 400 volt and 470uF 450 volt.

I am measuring around 2 to 300 hundred micramps at the max voltage depending
on the one being tested and need to know if this is in the safe zone.

Lane Zeitler
ku7i


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>