>
>Hi Peter,
>
>From: Peter Chadwick <Peter_Chadwick@mitel.com>
>To: "'amps'" <amps@contesting.com>
>Subject: RE: [AMPS] resonated input chokes
>Date sent: Tue, 1 Jun 1999 10:32:36 +0100
>
>>
>> Tom says:
>>
>> >I made the choke EXACTLY resonant by following the guidelines in
>> >Bill Orr's Handbook.
>>
>> My understanding is that is what you DON'T do! I understand that it should
>> be tuned a bit HF, so that it looks like a higher inductance, thus
>> maintaining constant current in the choke. It's useful to use Variac for
>> the commissioning stage so you can wind it all up very gently until you've
>> got it tuned right.
>
>That's what I learned, the hard way. After almost being killed by
>technical information Orr's handbook, I tossed it in the trash.
>
? Tom: What was the bleeder restance in the supply that ran amok.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|