Amps
[Top] [All Lists]

[AMPS] Re: PS diode equalizing

To: <amps@contesting.com>
Subject: [AMPS] Re: PS diode equalizing
From: measures@vc.net (Rich Measures)
Date: Tue, 6 Jul 1999 02:07:21 -0700


>Rich says:
>
>>?  In days of yore, folks commonly used 1w-rated resistors for equalizing 
>>1000piv diodes. 
>
Peter:
>This whole business of overrunning resistors on voltage rating has appeared
>before, on equalising voltages on series strings of electrolytics. I guess
>Rich (and he isn't the only one) has made the point that it's just bad
>practice, and it doesn't matter if it's a resistor across a diode or across
>an electrolytic, or whatever, it's still asking for trouble.
>
>> The max. rated potential for a 1w resistor is typically 350v.  
>
>You can get 500 volt rated ones  -  I think from Philips. Not common,
>though.
>
?  agreed  However, without equalization resistors, there is equal 
reverse current in each diode -- provided that the diodes are similar.  


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>