Amps
[Top] [All Lists]

[AMPS] Bias question

To: <amps@contesting.com>
Subject: [AMPS] Bias question
From: amps@txrx.demon.co.uk (Steve Thompson)
Date: Mon, 12 Jul 1999 07:13:13 +0100

-----Original Message-----
From: Jan.E.Holm@telia.se <Jan.E.Holm@telia.se>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 11 July 1999 07:48
Subject: [AMPS] Bias question



In a transistorized HF RF amp is there any rule of thumb
how to set the bias correctly, in this case for linear op.,
forexample the standing current might be so and so many
percent of the Ic?
I don´t have the curves for the transistors in question so
can´t determine it that way.

73, Jim SM2EKM

It can vary a lot, depending on the transistors and the load
conditions, but a reasonable guess is 5-10% of the peak
current.

Steve


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>