Amps
[Top] [All Lists]

[AMPS] Pi-Net math

To: <amps@contesting.com>
Subject: [AMPS] Pi-Net math
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Thu, 5 Aug 1999 16:32:26 +0100
Uwe says:

>Real loads (not complex) on both sides of the network permits no other
>phase angle as 0 and 180 d. at resonance.

I believe that a 180 degree difference between voltage and current will mean
a negative resistance. This is probably applicable when looking back at the
tube as a generator, depending on the model you are using.  

73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>